Single Beam Side View System

The ScanTrac Solo System is a ‘side view’ x-ray inspection system with gull wing shield doors.

Inspection orientation: side view
Package / product size:
Width 7 inches (178 mm)
Height 12 inches (305 mm)
Detection capabilities: (dependent on package and contents)
- metal as small as 0.3 mm
- glass as small as 1.0 mm
- stone as small as 1.0 mm
Environment: IP65 / NEMA4 washdown
Speed: Up to 700 fpm (feet per minute) or 2,400 CPM (containers per minute)
Voltage: 117 ~ 15 A or 230 VAC ~ 7 A, 50 or 60 Hz, single phase
Compressed air: as required for ejection

Ease of installation and small footprint

By mounting over existing conveyors up to 8 inches (20 cm.) wide, the cost and space required to install are both minimized. The small footprint created by the ScanTrac Main Unit allows installation in many restricted locations.

Accuracy at high speeds

The ScanTrac Inspection System set new standards for speed and accuracy by performing multiple high-resolution inspections on packages while detecting a wide range of contaminants or foreign objects in packaged foods and beverages including metal occlusions, shards of glass, stones, bone, rubber – even low-contrast images such as plastics in powders without compromise at conveyor speeds of up to 700 fpm (feet per minute).

Simultaneous inspections

ScanTrac systems can detect contaminants, components and voids while simultaneously determining density, fill level and fill volume.

Versatility

ScanTrac systems feature: adjustable X-Ray energy levels, expandable digital arrays, proprietary algorithms and real-time imaging that can be configured for a broad range of applications.

Targeted rejection

Out-of-conformance, (damaged, dented or upside down containers), and contaminated containers are identified and diverted or rejected down-stream.
Intuitive User- Friendliness Rugged and easy-to-use, ScanTrac’s intuitive systems feature Multiple Product Memories, On-Line Diagnostics, Auto-Calibration, Step-by-Step Set-Up menu, and Remote Monitoring for unmatched ease of installation, set-up and operation. Relatively inexperienced personnel achieve optimal inspections with minimal training.
Communications Options Operational status can be monitored locally and remotely through high speed Internet connection for continuous support.

Remote operator console

A remote console option is available for the ScanTrac Solo. It allows convenient access up to 20 feet (6 meters) from the x-ray system and conveyor.

Operator display

Full color operator display console allows bright display of menu options, and enhances easy to use operation. Images display continuously, and reject images can be retrieved.

NEMA4 / IP65 enclosure

Compact design allows operation in washdown area and within existing packaging lines.

Further information

Download a product data sheet

Sitemap